APU (Auxiliary Power Unit)
Engine 13.9 hp, 2 cyl Kubota
Oil Change interval 1,000 hours
Alternator 60 Amps @ 12 - 14 volts DC
Generator 4,000 watts @ 110/120V, 60Hz AC
Dimensions H/W/D 28.5" x 22" x 25 w/ air intake shroud
Weight 375 lbs.

   
 CCU (Climate Control Unit)
Air conditioning 12,000 BTU/hr – R134a
Heating 5,000 & 10,000 BTU/hr
Dimensions H/W/L 12" x 15" x 28"
Weight 85 lbs.
   

   
 Features Options

ComfortMonitor

WinterWatch

2 Start/Stop Timers

Maximum Run Time

Password Protection

Shore power

Condenser winter cover

Vent towers

Diamond Plate / Chrome Finish

 

 

 

 

   

 Warranty

 
4,000 hrs / 2 years  
 Lease / Finance  
LCA Online Application
US Equipment Finance Online Application
 

Click for Brochure

   
 ComfortPro Other APU’s

Sealed electric A/C compressor in the cabin ensures cooling capacity over time.

Open-drive compressor inside APU housing and refrigerant lines running from cabin to APU are exposed to harsh road environment, vibration, and magnesium chloride road treatment, increasing likelihood of leaks and reducing performance and life of cooling function.

Generator directly powers all cab accessories.

Cab power is provided from tractor batteries via an inverter, increasing number of cycles and reducing battery and APU alternator life.

Integrated tractor/APU engine heating provides warm APU starts in cold environment.

Cold starting the APU engine reduces its life and increases chance of APU cold no-starts.

Condenser coil distant from road environment, APU heat, and vibration.

Condenser coil inside APU housing reduces cooling power and condenser life. Increased tractor engine heat rejection reduces cooling power further.

Oil, air fuel, and oil change in fewer than 15 minutes.

Difficult-to-access filters increase regular service cost.

One integrated heating/cooling system.

Two different systems for heating and cooling increase installation and service complexity, and increase fuel consumption during heating and cab power operation.